Ref. 21055- USED TOTANI FD-60DL67SC, YEAR 2022
- Manufacturer: TOTANI
- Model: FD-60DL67SC
- Year: 2022
- Width: 640 mm
- FD-60DL67SC Pouch making Machine
- TOTANI POUCH MAKING MACHINE for Bottom Film Folded type of Stand-Up (2-Up) and (1-Up)
- Type of bags: Doypack (2 Lanes), stand up (2 Lanes), 3 side weld, pet food…
- Speed: Max 240 bags/min
- A. Unwind & Gusset Punch Section
- 1- W1600 mm Main Unwind Unit
- 2- 3″ Pneumatic Shaft (for W1600 unwinder)
- 4- 6″ Air Chuck for 3″ Pneumatic Shaft and Inflator Tool
- 1- Dancer Unit
- 1- Infeed Servo Motor Control Unit with Rubber Roller
- 1- EPC (Edge Guide Control) Unit
- 1- Frame for bottom punching device
- 1- Bottom punching device: 4units (8 holes) *toothed blade type (not male and female)
- 8- Punching Blade for bottom punching (Dia. 16mm) *air slug removal type
- 1- Vacuum system for bottom punch waste
- 1- Mark sensor unit to control the bottom punch position (sensor from bottom side)
- B. Stand-Up pouch Additional equipment (2 Pouches /cycle)
- 1- Stand-Up Pouch making equipment
- 1- Registration system for longitudinal heater unit
- 1- Wider heater (W100) and cooler (W110)
- 8- K-Seal bar for Stand-Up Pouch
- C. 1- Vacuum system for round corner punch and notch waste
- D. Side Gusset Forming Section
- 1- Gusset Forming Unit 1- Middle Dancer Unit
- E. Longitudinal/Side Sealing Section
- 2- Longitudinal Heater and Cooler (Heater L920 mm x W60mm, Cooler L460mm)
- 2- Drop down system for the above heaters
- 1- Teflon Winder
- F. Cross/Bottom Sealing Section (Frame Length =6200mm)
- 1- Infeed Servo Motor Control Unit with Rubber Roller
- 5- W50mm Cross Heater
- 5- Drop down system for the heaters
- 2- W60mm Cross Coolers
- 1- Mark Sensor Automatic Tuning (sensor from top and bottom side)
- 1- Splice detector system for the main web
- 1- Tension control dancer unit
- 1- Main Servo Motor for Heater Up-Down
- 1- Temperature Control
- 1- Slitting device with 5 razor blade holders
- G. Finished Pouch Section
- 1- Double Cutter Control Device (Max. Double Cut Width: 3mm)
- 1- Infeed Servo Motor Control Unit with Rubber Roller (with 50mm segmented roller in the middle)
- 1- Indexing Conveyor Table for Stacking Finished Pouches (L=1500mm)
- H. Miscellaneous Items
- 1- Round corner punch device with base (for 2-up)
- 2- Round corner punch blade (center, R10/W0,2)
- 4- Round corner punch blade (both edges, R10/W0,2)
- 2- Trim Edge Rewinder with Caster
- 2- Notching Device (Depth 300mm)
- 2- Mounting Base for Notching Device
- 2- Notching Blade (Hexagonal Shape 2x4mm)
- 2- Waste Collecting device
- 20- Straight Sealing Bar (Aluminum) for cross heater
- 4- Straight Sealing Bar (Aluminum, Width 10mm) for longitudinal heater
- 4- sets of SP Bottom Sealing Bar (Aluminum) *Parabolic type
- 2- Handle Punching Device with Mounting base
- 2- Handle Punch Blade (Oval / 20x80mm)
- 10- Forming plates
- 1- Transformer (380V to 200V)
- 1- Safety Light Curtain System (for CE regulation)
- 1- Instruction Manual in English
- 1- Display in English
- Zipper application Equipment
- 1- Frame for zipper section
- 2- Zipper heater (640mm) and cooler (330mm)
- 3- Zipper guide plate with water cooling facility (center plate W70, 80, 90)
- 2- Zipper insertion device with splice detector
- 1- Rubber roller unit controlled by servo motor
- 2- Zipper unwind unit (with larger rollers)
- …
